UK industrial valve sourcing, automation packages and practical application support

ALLWAY VALVESIndustrial valve supply & selection Request a Quote

Technical article

Valves in Renewable Energy: Geothermal, Solar Thermal and Tidal Applications

How valves are specified and applied in geothermal, concentrated solar thermal and tidal energy systems, including the unique material and design challenges of each renewable technology.

  • Renewable energy systems — geothermal, concentrated solar thermal, and tidal — present valve engineers with some of the most novel and demanding service conditions in modern industry, combining extreme temperatures, corrosive process fluids, and the reliability requirements of baseload electricity generation.
  • Geothermal brines are among the most chemically aggressive process fluids encountered anywhere, combining high salinity, dissolved gases, silica scaling, and sometimes heavy metals in a hot, high-pressure fluid that challenges every conventional valve material selection framework.
  • As the energy transition scales up these technologies from demonstration projects to commercial gigawatt-scale installations, the valve engineering community is developing new standards, new materials, and new maintenance strategies to meet requirements that no existing standard fully addresses.

Renewable energy is creating some of the most technically interesting valve challenges I’ve come across. Geothermal, solar thermal, and tidal systems all involve fluids and operating conditions that don’t fit neatly into conventional valve selection frameworks — and the engineers working on these projects are genuinely figuring things out as they go. Here’s what we know about valve selection in these applications and what the key engineering challenges are.

Geothermal Valve Engineering

Geothermal systems extract heat from underground formations, producing brines and steam that can be highly corrosive and scaling. The specific chemistry varies enormously between geothermal fields — from relatively benign low-salinity steam systems to extremely aggressive high-temperature brines with dissolved silica, CO2, H2S, and heavy metals. The valve engineer’s first task on any geothermal project is to obtain a detailed fluid chemistry analysis for the specific site before any material selection decision is made.

High-temperature steam valves at the wellhead (flash steam plants) operate at 150-250°C and pressures of 5-40 bar. Carbon steel with Chrome-Moly (P11, P22) trim is used for the highest temperature service; cast carbon steel (WCB) for moderate temperature applications. The steam is typically wet with entrained brine droplets that accelerate erosion of valve internals — hard-faced trim (Stellite 6) is standard for valves in wet steam service.

Brine reinjection valves handle the cooled geothermal brine being returned to the reservoir to maintain pressure and reduce surface disposal requirements. Brine at reinjection conditions is typically 80-120°C with high chloride and dissolved solids. Super duplex stainless steel or rubber-lined valves are typical specifications — standard 316L is often inadequate for the chloride concentration combined with elevated temperature.

Silica scaling is a specific operational challenge in geothermal systems. As hot brine cools and depressurises, dissolved silica precipitates and forms scale deposits on valve internals and pipe walls. Valves selected for geothermal service must either be designed with large internal passages that tolerate scale buildup without functional impairment, or be positioned in the system where chemical scale inhibition or temperature control prevents scale formation. Valves that cannot be cleaned in place need a maintenance strategy that accounts for regular descaling.

Concentrated Solar Thermal Valve Applications

Concentrated Solar Power (CSP) systems use mirrors or lenses to focus sunlight onto a receiver, generating heat that drives a turbine. The heat transfer fluid (HTF) circulates between the solar field and the steam generator, and the valves handling the HTF must operate reliably at very high temperatures — up to 400°C for thermal oils (Dowtherm, Therminol) and up to 565°C for molten nitrate salt systems.

Thermal oil valves operate at temperatures where standard elastomeric seals and PTFE seats are long since degraded. Graphite packing, metal-seated ball valves, and globe valves with metallic bellows seals are the standard specifications. The thermal oil itself has a specific fire risk — Dowtherm A has an autoignition temperature of around 600°C, but in a fine mist or on a hot surface can ignite at much lower temperatures. Valve body designs that eliminate external leak paths (bellows seal valves, welded construction) are preferred to minimise the risk of thermal oil release onto hot surfaces.

Molten salt CSP systems operate at higher temperatures still (up to 565°C) with Solar Salt (60% NaNO3/40% KNO3). At these temperatures, standard carbon steel is acceptable for molten salt contact, but the thermal cycling from 285°C (minimum operating temperature, below which salt solidifies) to 565°C creates significant thermal fatigue loading on valve bodies and actuators. Valve specifications for molten salt service must include: minimum operating temperature consideration to prevent salt solidification in the valve, trace heating on the valve body to maintain salt above its freezing point during shutdown, and actuator specifications that account for the high operating temperatures in the vicinity of the valve.

Tidal and Wave Energy Valve Applications

Tidal energy systems — tidal stream turbines, tidal barrages, and wave energy converters — require valves that combine the seawater corrosion resistance requirements of offshore valves with the specific mechanical demands of submerged or semi-submerged installation in tidal environments. The combination of continuous seawater immersion, tidal flow-induced vibration, and the maintenance access constraints of intertidal or subtidal installation creates a challenging specification environment.

Tidal barrage valves (sluice gates, sector gates, and bulkhead valves) handle enormous water volumes at relatively low heads. Their design is more civil engineering than process engineering — the dominant loads are hydrostatic pressure on large gate areas, sealing at low differential pressures, and the reliability requirements of a structure that cannot be easily accessed for maintenance. Stainless steel (316L or duplex) gate seals and guide systems, with HDPE or ultra-high-molecular-weight polyethylene (UHMWPE) seal faces, are typical specifications.

Renewable energy valve engineering is a field where the engineering community is genuinely at the frontier. The standards are still being written, the long-term material performance data is still being collected, and the maintenance strategies for novel applications are still being developed through operational experience. Engineers working in this space need to combine rigorous application of fundamental principles with the willingness to engage directly with manufacturers, research institutions, and other operators to share knowledge and develop best practice collectively. It’s one of the genuinely exciting areas of the valve engineering world right now.