Verified product catalogue
Choose a product
56 products match
AWV-000124
Ductile Iron Gate Valve – Flanged PN16 – Soft Seated
Ductile Iron · PN16 · PN16
Price: On Application
AWV-000159
Cast Iron Gate Valve – Flanged PN16 – Stainless Steel Stem – PN16 Rated
Cast Iron · PN16 · PN16, PN10
Price: On Application
AWV-000167
CR Brass Gate Valve
Brass · Compression Ends · 15mm, 22mm, 28mm, 35mm, 42mm, 54mm
Price: On Application
AWV-000173
Ductile Iron Gate Valve – Flanged PN16 – Soft Seated – NBR
Ductile Iron · PN16 · PN16
Price: On Application
AWV-000180
Brass Vacuum Tanker Gate Valve – AGRI Square Flanged
Brass · AGRI Standard Square · 3 Bar, 2.5 Bar, 1.5 Bar
Price: On Application
AWV-000210
Brass Lockshield Gate Valve
Brass · Compression Ends · 15mm, 22mm, 28mm
Price: On Application
AWV-000213
Stainless Steel Gate Valve – Flanged PN16
Stainless Steel · PN16 · PN16
Price: On Application
AWV-000241
Forged Steel Gate Valve – Socket Weld
Forged Steel · Socket Weld · Class 800, 136.2 Bar
Price: On Application
AWV-000248
Cast Iron Gate Valve – Flanged Table E
Ductile Iron · Table E · 13.8 Bar
Price: On Application
AWV-000261
Cast Iron Gate Valve – Flanged PN16 – Brass Stem – PN10 Rated
Cast Iron · PN16 · PN16, PN10
Price: On Application
AWV-000276
Ductile Iron Gate Valve – Flanged PN16 – BS5163 Part 1 & 2:2004 – WRAS Approved
Ductile Iron · PN16 · PN16
Price: On Application
AWV-000277
Ductile Iron Gate Valve – Flanged PN16 – BS5150 (EN1171)
Ductile Iron · PN16 · PN16
Price: On Application
AWV-000282
Forged Steel Gate Valve – Flanged ANSI 150
Forged Steel · ANSI 150 · ANSI 150
Price: On Application
AWV-000284
Ductile Iron Gate Valve – BSI V7 Gas Approved – PN7 Rated
Ductile Iron · PN16 · PN7, PN16, 7 Bar
Price: On Application
AWV-000292
Brass Lockshield Gate Valve – PN20 – WRAS Approved
Brass · BSPT · PN20
Price: On Application
Technical overview and selection guidance
This guide explains how gate valves work in practical terms and shows where the concept affects valve or actuator selection.
Why it matters
Valve decisions often fail when a label, nominal rating or catalogue headline is treated as a complete specification. Use the concept here to ask better questions, then verify the answer against the governing standard and current manufacturer documentation.
Engineering workflow
- Define the process case, including normal and worst credible conditions.
- Use consistent units and distinguish operating data from design data.
- Identify the product variables that affect the result.
- Check assumptions against a current datasheet, calculation method or standard.
- Record the basis of selection for review and future maintenance.
Common mistakes
- Mixing gauge and absolute pressure, or nominal and actual dimensions.
- Assuming a standard name guarantees every construction detail.
- Ignoring temperature derating, fluid properties or transient conditions.
- Using approximate guidance as a final certified calculation.
Questions to carry into an enquiry
- Which values are measured, calculated or assumed?
- Which operating case controls the selection?
- What evidence is required—datasheet, certificate, test report or calculation?
- What happens if the valve fails open, closed or in place?