Verified product catalogue
Choose a product
424 products match
AWV-000001
Brass Mini Ball Valve – Female x Female – Chromed Finish – WRAS Approved
Brass · BSPP · PN16
Price: On Application
AWV-000002
Brass Mini Ball Valve – Male x Female – Chromed Finish – WRAS Approved
Brass · BSPP · PN16
Price: On Application
AWV-000005
Brass Mini Ball Valve – Male x Female BSPP – Black Short Handle
Brass · BSPP · PN16
Price: On Application
AWV-000007
Brass Ball Valve – Standard Pattern – Red Aluminium Lever – WRAS Approved
Brass · BSPP · PN64, PN40, PN32, PN25, PN16
Price: On Application
AWV-000008
Brass Ball Valve – Standard Pattern – Male x Female – Red Aluminium Lever – WRAS Approved
Brass · BSPP, BSPT · PN64, PN40, PN32, PN25, PN16
Price: On Application
AWV-000012
Brass Spring Check Valve – Male x Female
Brass · BSPP · 0.02 Bar, PN16, PN10
Price: On Application
AWV-000013
Brass Ball Valve – Male Union End – Red Butterfly Handle – WRAS Approved
Brass · BSPP · PN25, PN32
Price: On Application
AWV-000014
Brass Spring Check Valve – Acetal Disc
Brass · BSPP · 0.02 Bar, PN16, PN10, PN8
Price: On Application
AWV-000016
Brass Ball Valve – Standard Pattern – Red PVC Coated Steel Lever – WRAS Approved
Brass · BSPP · PN64, PN40, PN32, PN25, PN16
Price: On Application
AWV-000017
Brass Ball Valve – BSI Gas Approved – Yellow Lever – Rated from PN40 to PN16
Brass · BSPP · PN40, PN16, PN64, PN25
Price: On Application
AWV-000020
Brass Ball Valve – Standard Pattern – Male x Female – Red Butterfly Handle
Brass · BSPP, BSPT · PN64, PN40, PN32
Price: On Application
AWV-000021
Brass Ball Valve – Standard Pattern – Red Butterfly Handle – WRAS Approved
Brass · BSPP · PN64, PN40, PN32
Price: On Application
AWV-000024
Brass Mini Ball Valve – Female x Female BSPP – Black Short Handle
Brass · BSPP · PN16
Price: On Application
AWV-000025
Stainless Steel Ball Valve – Two Piece – Lever Operated – WRAS Approved
Stainless Steel · BSPP · PN63
Price: On Application
AWV-000026
Brass Spring Check Valve – Metal Disc
Brass · BSPP · 0.02 Bar, PN35, PN25, PN12
Price: On Application
AWV-000033
Stainless Steel Mini Ball Valve – Male x Female
Stainless Steel · BSPP · PN63
Price: On Application
AWV-000036
Stainless Steel Ball Valve – One Piece
Stainless Steel · BSPP · PN63
Price: On Application
AWV-000037
Lugged & Tapped Butterfly Valve – Stainless Steel Disc – EPDM Liner
Ductile Iron · Lugged & Tapped, PN10, PN16 · PN16, PN10, PN10/16
Price: On Application
AWV-000039
Brass Mini Check Valve – Male x Female
PN16, 0.02 Bar · 1", 1/2", 3/4"
Price: On Application
AWV-000041
Brass Ball Valve with Locking Yellow Lever – BSPT
Brass · BSPT · PN25, PN40, PN16
Price: On Application
AWV-000042
Brass Spring Check Valve- Metal Disc – High Pressure
Brass · BSPP · 0.02 Bar, PN50, PN35
Price: On Application
Technical overview and selection guidance
The suitability of this valve depends on the detailed design rather than the category name alone.
Where Safety Valves fit
Safety Valves may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Safety Valves?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.