Fire Pump and Sprinkler System Valves: NFPA 20 and Control
NFPA 20 requires listed OS&Y or indicating isolation valves on both the pump suction and discharge, with a listed check valve between the pump and the […]
Read guide →Practical valve, actuation and flow-control guidance written for engineers, buyers and maintenance teams.
NFPA 20 requires listed OS&Y or indicating isolation valves on both the pump suction and discharge, with a listed check valve between the pump and the […]
Read guide →Deep-shaft pump columns routinely lift water against 1,000–2,000 m of head, so discharge valves see Class 600 to Class 2500 (PN100–PN420) working pressures that dictate every […]
Read guide →Seawater RO trains run at 55–82 bar, so feed, reject and high-pressure header valves need Class 900/1500 or PN100 bodies in 254 SMO (6% Mo, PREN […]
Read guide →A rapid gravity filter typically filters at 5–15 m/h but backwashes at 15–40 m/h, so the filter backwash valves on the waste and wash-water lines must […]
Read guide →Every wetted component on a potable line must hold a valid approval — WRAS to BS 6920 in the UK, or 4MS listing under the Regulation […]
Read guide →UK heat networks are built to CIBSE/ADE CP1 (Heat Networks: Code of Practice), which sets the design flow and return temperatures, differential-pressure limits and commissioning duties […]
Read guide →The weir-type diaphragm valve is the default sterile-boundary valve on a bioreactor because it has no dead leg and no packing to the process; ASME BPE […]
Read guide →Water-for-injection (WFI) loops are usually circulated hot, at 80°C or above, and every branch off the loop must obey the dead-leg rule of L/D no greater […]
Read guide →Dye liquor runs hot and chemically hostile: HTHP jet and package machines cycle to 130°C at 3–4 bar, with pH swinging from 4 (acid dyeing) to […]
Read guide →Stock is classified by consistency — low (under 1%), medium (roughly 2.5–5%) and high (8–15%) — and valve choice tracks that number directly, because fibre plugs […]
Read guide →