Verified product catalogue
Choose a product
90 products match
AWV-000043
Brass Solenoid Valve – Normally Open – NBR Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
AWV-000076
Brass Solenoid Valve – Normally Closed – NBR Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
AWV-000077
Brass Solenoid Valve – Direct Acting – 3/8 ” to 1″
Brass · BSPP · 5 Bar, 3 Bar
Price: On Application
AWV-000097
Brass Solenoid Valve – Servo-assisted – Normally Closed
Brass · BSPP · 0.15 Bar, 25 Bar, 20 Bar
Price: On Application
AWV-000191
Stainless Steel Angle Seat Valve fitted with Single Acting PA Actuator
Stainless Steel · BSPP · PN25
Price: On Application
AWV-000256
Brass Solenoid Valve – 2/2 Pilot Operated – Normally Closed
Brass · BSP · 0.15 Bar, 16 Bar, 14 Bar, 10 Bar
Price: On Application
AWV-000257
Brass Solenoid Valve – Servo-assisted – Normally Open
Brass · BSPP · 0.15 Bar, 25 Bar, 20 Bar
Price: On Application
AWV-000269
Stainless Steel Solenoid Valve – Servo-assisted – Normally Closed
Stainless Steel · BSPP · 0.15 Bar, 25 Bar
Price: On Application
AWV-000342
Brass Solenoid Valve – Direct Acting 2/2 – Viton Diaphragm
Brass · BSP · 10 Bar, 8 Bar, 6 Bar, 4 Bar
Price: On Application
AWV-000386
Brass Solenoid Valve – 2/2 Pilot Operated – Normally Open
Brass · BSP · 0.15 Bar, 16 Bar, 14 Bar, 10 Bar
Price: On Application
AWV-000409
Brass Solenoid Valve – Direct Acting 3/2 – Viton Diaphragm
Brass · BSP · 20 Bar
Price: On Application
AWV-000415
Brass Solenoid Valve – Normally Closed – Viton Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
AWV-000425
Brass Solenoid Valve – Normally Open – Viton Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
AWV-000458
Brass Solenoid Valve – 2/2 Combined Acting – NBR Diaphragm
Brass · BSP · 12 Bar, 10 Bar, 6 Bar
Price: On Application
AWV-000465
Stainless Steel Solenoid Valve – Servo-assisted – Normally Open
Stainless Steel · BSPP · 0.15 Bar, 25 Bar
Price: On Application
AWV-000515
Stainless Steel Solenoid Valve – 2/2 Combined Acting – Viton Diaphragm
Stainless Steel · BSP · PN16
Price: On Application
AWV-000517
RAC1 Stainless Steel Solenoid Valve – Direct Acting 2/2 – Viton Diaphragm
Stainless Steel · BSP · 20 Bar, 19 Bar
Price: On Application
AWV-000518
Brass Solenoid Valve – Direct Acting 2/2 – Viton Diaphragm
Brass · BSP · 16 Bar, 8 Bar
Price: On Application
AWV-000557
Solenoid Operated Gas Safety Shut-off Valve – Flanged PN16 – Automatic Reset
Aluminium · PN16 · PN16
Price: On Application
AWV-000558
Solenoid Operated Gas Safety Shut-off Valve – Screwed BSPP – Automatic Reset
Aluminium · BSPP · 1 1/2", 1 1/4", 1", 1/2", 2", 3/4"
Price: On Application
Technical overview and selection guidance
The suitability of this valve depends on the detailed design rather than the category name alone.
Where Accessories & Control Equipment fit
Accessories & Control Equipment may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Accessories & Control Equipment?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.