Verified product catalogue
Choose a product
10 products match
AWV-000667
Ductile Iron Butterfly Valve – Electrically Actuated
Ductile Iron · Lugged & Tapped · PN10/16, PN10
Price: On Application
AWV-000668
Ductile Iron Butterfly Valve – Electrically Actuated
Ductile Iron · Lugged & Tapped · PN10/16, PN10
Price: On Application
AWV-000669
Ductile Iron Butterfly Valve – Electrically Actuated
Ductile Iron · Wafer · PN10/16, ANSI 150, PN10
Price: On Application
AWV-000670
Ductile Iron Butterfly Valve – Electrically Actuated
Ductile Iron · Wafer · PN10/16, ANSI 150, PN10
Price: On Application
AWV-000671
Carbon Steel High Performance Butterfly Valve – Electrically Actuated
Carbon Steel · Wafer · PN10/16, ANSI 150, PN25
Price: On Application
AWV-000672
Carbon Steel High Performance Butterfly Valve – Electrically Actuated
Carbon Steel · Lugged & Tapped · PN16/25, PN16, PN25
Price: On Application
AWV-000673
Stainless Steel Butterfly Valve – Electrically Actuated
Stainless Steel · Wafer · PN6/10, ANSI 150, PN16, PN10
Price: On Application
AWV-000674
Ductile Iron Butterfly Valve – Electrically Actuated
Ductile Iron · Lugged & Tapped · ANSI 150, PN16
Price: On Application
AWV-000675
Ductile Iron Butterfly Valve – Electrically Actuated
Ductile Iron · Lugged & Tapped · PN10/16, PN16, PN10
Price: On Application
AWV-000676
Ductile Iron Butterfly Valve – Electrically Actuated
Ductile Iron · Wafer · PN6/10, ANSI 150, PN16, PN10
Price: On Application
Technical overview and selection guidance
A circular disc rotates within the pipe. The disc remains in the flow path, so geometry, velocity, seat design and clearance influence torque and pressure loss.
Where Electrically Actuated Butterfly Valves fit
Electrically Actuated Butterfly Valves may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Electrically Actuated Butterfly Valves?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.